BANDON BLACK

COPY AND PASTE INTO APPROPRIATE CSI DIVISION
SECTION 07 46 23
CHARRED WOOD SIDING

Surface & Texture

Bandon Black is the original charred surface and compares to what Japanese traditionally call Suyaki. The texture is a dense char resembling reptile skin. The soot layer is approximately 1/16 inch (1.5 mm) thick. This finish is suitable for indoor and outdoor applications. If used indoors it should be properly sealed to bond the soot.

Wood Grade

Select – JAS “Small Knot” grade allows for up to 20 tight or 10 dead knots per 79” (2m) board length. Unlimited combination of heartwood and sapwood, pith allowed. Checks allowed to 1/16” as long as plank stability, weather-resistance, and cosmetics are not adversely affected.

Species

Native to Oregon and NW California, Chamaecyparis lawsoniana is a species of conifer also known as Port Orford Cedar, white or Oregon-cedar, ginger-pine, or Lawson cypress. Renowned for its beauty and structural integrity, useful for both indoor and outdoor applications. Port-Orford-Cedar has earned a reputation for strength and decay-resistance. It is a particularly hard and strong cedar with the similar or superior natural durability as other types of cedar when it comes to weather, rot and insects.

Moisture Content

Dried then burnt to 15% MC, but may fluctuate during transport or warehousing. Please acclimate on site for two weeks prior to installation.

Fire Resistance

Fire rating is currently in process, Bandon Burn will test to ASTM E84 and UL723 CLASS A Flame Spread and Smoke Developed with or without fire retardant. Species tests to CAN/ULC S102-10 FS or 25 and SDI of 60 without fire retardant. Fire retardant pretreatment not available for interior.

DIMENSIONS & GRADES AVAILABLE

Select Grade

1x6”

American #2 Lap

1x5-5/16”

Euro Lap

1x5-11/16”

ALS Square Edge

1x5-11/16

Euro Square Edge

Profile

Length

Reveal

Thickness

6” American #2 Lap

8-16’

5.0”

3/4”

5-5/16” Euro Lap

8-16’

5.5”

9/16”

5-11/16” ALS Square Edge

8-16’

5.5”

3/4”

5-11/16” Euro Square Edge

8-16’

5.5”

9/16”

Installation Details

Overage
Please add a healthy overage ranging 15-20%
Fastening
Exterior – two ring or screw-shank headed face nails per furring strip within 1” of each edge
Interior – tube adhesives and pin nails
Substrate
Exterior – rigid furring minimum 16*OC
Interior – per design specification
Installation Layout
Vertical or horizontal, all profiles

Pre-Finish Options Available
C2 Paint Guard – Water based
Semi-Opaque Carbon and Clear
Flood Pro-Series – Oil based
Semi-Opaque Ebony and Clear

MANUFACTURER:
Bandon Burn
PO Box 501, Sherwood, OR 97140
503-770-(BURN) 2876